Satel INTEGRA Plus Specifiche Pagina 42
- Pagina / 82
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
40 Programming SATEL
Max. no violation time – exceeding the maximum time of no violation is recognized by the
control panel as a detector failure. The time will only be counted when the zone is
disarmed. If the value 0 is programmed, control of this time is disabled. The time can be
programmed in hours or minutes.
It is recommended that you program the M
AX
.
NO VIOLATION TIME
parameter, since it will
provide an additional supervision of the detector connected to the zone.
3.3.5 Zone types
0. E
NTRY
/E
XIT
– a delayed zone combining two functions:
entry – violation of the zone starts entry delay counting in the partition and turns on delay
for the 3.
I
NTERIOR DELAYED
type zones;
exit – violation of the zone during exit delay countdown is equivalent to the partition exit.
1. E
NTRY
– violation of the zone starts entry delay counting in the partition and turns on delay
for the 3.
I
NTERIOR DELAYED
type zones.
2. D
ELAYED
– a delayed-action zone with optional signaling of delay countdown in keypads.
3. I
NTERIOR DELAYED
– the zone operates as a delayed one when:
– violation of another zone has triggered the entry delay countdown in the partition;
– the delay will be activated using the INT-ENT entry keypad (see the INT-SCR
multifunction keypad manual);
– arm mode type 2 or 3 is active and the D
ELAY IN
2&3
TYPE ARMING
option is enabled for
the zone.
In other situations, the zone will act as an instant one.
4. P
ERIMETER
– instant zone, which is already armed during exit delay countdown.
5. I
NSTANT
– instant zone.
6. E
XIT
– violation of the zone during exit delay countdown is equivalent to the partition exit.
7. D
AY
/N
IGHT
– if disarmed, the zone will signal violation acoustically in keypads and on
the 9. DAY
A
LARM
, 12. S
ILENT ALARM
and 116. I
NTERNAL
S
IREN
outputs. When armed, the
zone acts as the 5. I
NSTANT
zone.
8. E
XTERIOR
– a zone with alarm verification: zone violation will start counting the surveillance
time – if a second violation takes place during this time, an alarm will be triggered. If the
S
URVEILLANCE TIME
is not programmed (the value 0 is entered), the alarm will be generated
upon the first violation.
9. 24
H
T
AMPER
– permanently armed zone, intended for the tamper circuits. The zone
violation will additionally cause a trouble condition.
10. 24
H
V
IBRATION
– permanently armed zone, intended for working with vibration detectors.
If the partition includes the 10. 24
H
V
IBRATION
zone, starting the procedure of arming
from the LCD keypad will initiate a test of vibration detectors (the 39. T
EST VIBRATION
DETECTORS
output is activated and the countdown of time remained to the test end is
running).
11. 24
H
C
ASH MACHINE
– permanently armed zone, intended for protection of a cash machine.
12. PANIC-
AUDIBLE
– permanently armed zone, intended for operating the panic buttons.
13. PANIC-
SILENT
– permanently armed zone, intended for operating the panic buttons.
Violating the zone will trigger a silent alarm.
14. M
EDICAL
–
B
UTTON
15. P
ERSONAL EMERGENCY
The zone types 14 and 15 trigger alarm signaled in the LCD keypads and on the 12. S
ILENT
ALARM
outputs. The names of zones and codes of events from these zones are consistent
with the Contact ID reporting format.
- PROGRAMMING 1
- 2 Programming SATEL 4
- SATEL INTEGRA Plus 3 5
- 1. General 6
- 2. Programming options 6
- 2.1.5 Service mode menu 7
- 6 Programming SATEL 8
- SATEL INTEGRA Plus 7 9
- 8 Programming SATEL 10
- SATEL INTEGRA Plus 9 11
- [n – counter number] 11
- SATEL INTEGRA Plus 11 13
- [n – identifier number] 13
- 12 Programming SATEL 14
- SATEL INTEGRA Plus 13 15
- 14 Programming SATEL 16
- SATEL INTEGRA Plus 15 17
- 16 Programming SATEL 18
- SATEL INTEGRA Plus 17 19
- (only INT-S and INT-SK) 19
- (only INT-SCR) 19
- [n – number of output] 19
- 18 Programming SATEL 20
- SATEL INTEGRA Plus 19 21
- (does not apply to CA-64 DR) 21
- 20 Programming SATEL 22
- SATEL INTEGRA Plus 21 23
- 22 Programming SATEL 24
- 2.2 DLOADX program 25
- 24 Programming SATEL 26
- SATEL INTEGRA Plus 25 27
- 26 Programming SATEL 28
- program 29
- 28 Programming SATEL 30
- SATEL INTEGRA Plus 29 31
- LOADX program 32
- Configuring the GSM module 33
- Initiating a connection 33
- 3. System structure 34
- 3.2.3 Partition parameters 35
- Partition type 36
- Options 37
- 3.3 Zones 38
- 3.3.3 Programming the zones 39
- 3.3.4 Zone parameters 39
- 38 Programming SATEL 40
- SATEL INTEGRA Plus 39 41
- 3.3.5 Zone types 42
- SATEL INTEGRA Plus 41 43
- 3.3.6 Zone options 44
- SATEL INTEGRA Plus 43 45
- 44 Programming SATEL 46
- 3.3.7 Counters 47
- 3.3.8 Bypasses 47
- 4. Outputs 48
- 4.1 Output parameters 49
- 4.2 Output functions 49
- 48 Programming SATEL 50
- SATEL INTEGRA Plus 49 51
- 50 Programming SATEL 52
- SATEL INTEGRA Plus 51 53
- 4.3 Options 54
- 4.4 Output triggering 54
- 4.6 Output disabling 55
- 4.8 Output groups 56
- 4.9 Output state indicating 57
- 4.11 Output testing 57
- 5. System options 58
- 5.2 Printer options 59
- 5.3 Other options 60
- SATEL INTEGRA Plus 59 61
- 4 Arming options 62
- Times 5.5 63
- 5. r parameters 63
- 62 Programming SATEL 64
- 6. Programming the keypads 65
- 64 Programming SATEL 66
- SATEL INTEGRA Plus 65 67
- 66 Programming SATEL 68
- 7. Timers 69
- 8. User schedules 70
- 9. Reporting 70
- SATEL INTEGRA Plus 69 71
- 9.1.2 Advanced options 72
- Identifiers 73
- SIA / TELIM prefix 74
- Events assignment 74
- 9.1.4 SIA-IP 74
- 9.1.6 Event codes 74
- 9.2 Starting the reporting 75
- 9.2.3 GPRS reporting 76
- 10. Messaging 77
- 76 Programming SATEL 78
- 10.2.1 Events assignment 79
- 78 Programming SATEL 80
- SATEL INTEGRA Plus 79 81
- 13. Manual update history 82
Prodotti e manuali riguardandi Sistemi di controllo di accesso Satel INTEGRA Plus
(27 pagine)Applica GR0080S manuels
Manuels d'utilisation et guides de l'utilisateur pour Barbecues et grillades Applica GR0080S.
Nous fournissons des manuels en pdf 1 Applica GR0080S à télécharger gratuitement par type de document : Manuel
Applica GR0080S Manuel (13 pages)
marque: Applica | Catégorie: Barbecues & grills | Taille: 0.50 MB |
Table des matières
Plus de produits et de manuels pour Barbecues et grillades Applica
| Modèles | Type de document |
|---|---|
| GR36P |
Manuel
 
Applica GR36P barbecue,
19 pages
|
| GRP72CTB |
Manuel
Applica GRP72CTB barbecue,
15 pages
|
| Indoor/Outdoor Domed Grill |
Manuel
Applica Indoor/Outdoor Domed Grill,
13 pages
|
| G5 Grill |
Manuel
Applica G5 Grill,
17 pages
|
| GEORGE FOREMAN 360 GRILL WITH RED FINISH...INTRODUCING THE BIGGEST, MO |
Manuel
Applica GEORGE FOREMAN 360 GRILL WITH RED FINISH...INTRODUCING THE BIGGEST, MO,
23 pages
|
| GRP99 |
Manuel
Applica GRP99 barbecue,
13 pages
|
| GR0036B |
Manuel
Applica GR0036B barbecue,
2 pages
|
| GR144 |
Manuel
Applica GR144 barbecue,
13 pages
|
| SM-1 |
Manuel de l'utilisateur
1203-SM1 Basic Mode (SLC to SCANport),
8 pages
|
| SM-1 |
Manuel de l'utilisateur
1203-SM1 Enhanced Mode (SLC to SCANport),
12 pages
|
© 2020, manymanuals.it. Tutti i diritti riservati | 0.124 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale